Maintaining your Sump Pump during the Winter
Winter maintenance is important in ensuring that your electrical appliances don’t fail due to extreme weather. Given the unpredictability of the winters in NEPA, we recommend winterizing most appliances in your home that will not be used, from your hot water heater to your sump pump.
Unfortunately, damaged sump pumps are one of the most common home inspection errors we see in a lot of homes in NEPA. This guide will help you prolong the longevity of your sump pump through some simple winter maintenance.
Remove the Discharge Hose
First, you can begin by removing your sump pump discharge hose for the winter. By removing the hose connecting your sump pump to the discharge pipe and leaving it disconnected until warmer weather returns, you will prevent it from freezing.
Since this hose is exposed to the elements more than any other part of your system, it’s essential to start here. It’s also important to remember to re-attach the hose when it becomes warmer out as things will begin to thaw.
You can also choose to have an extra discharge hose. With the extra hose, you can remove one hose if it freezes and replace it with the spare while the first thaws out.
Keep Your Sump Pump Running
A common misconception among homeowners is that you should unplug your sump pump for the winter to protect it.
You should never unplug your sump pump because if the weather warms up and snow or a rain storm hits your area, your basement could flood
Clean Out the Sump Pit
Clear out debris from your sump pump's pit that may have accumulated through the summer and fall. You should make sure that there is no dirt, ice, gunk, or any other debris that might inhibit the system. This will help to prevent clogs in the intake or discharge pipes and prevent mold from accumulating that can spread around the home.
Test Your Pump to Ensure Its Functional
You should also test your pump regularly. During the winter months, run some water through it to ensure that it is functioning properly. Run a test every few weeks to keep your sump pump running in tip-top shape.
Inspect Your Discharge Pipe
Another important tip is to make sure that your discharge pipe gets rid of water away from your home. Your pump's discharge pipe takes water from your sump pump and disposes of it away from your home. If your discharge pipe is too close, the water could keep seeping back into your sump pump and cause it to run continuously. It is recommended that water be discharged at least ten feet away from your home's foundation to prevent damage and cracks from forming.
You can even wrap your pipe with a thermal blanket like any other pipe in your home to prevent it from freezing.
Keep Your Basement Warm
Lastly, we recommend that you keep your heat on in your basement. By keeping your basement warm, you can prevent any of your home's pipes from freezing. Consider upgrading your insulation to save money and keep your basement warm during the freezing months.
We hope that these tips will help you prevent damage to your sump pump and ensure that it is properly maintained!
How to Prevent your Pipes from Freezing
Of the many consequences that cold weather can bring in NEPA, frozen pipes are one of the most destructive. Repairing burst pipes could end up costing you hundreds of dollars and lead to issues like mold and foundation cracks. For people with burst pipes, we also recommend a follow-up home inspection to ensure further damage has not occurred.
Unfortunately, frozen pipes can occur in homes with both plastic and copper pipes, so it is important to know what to do to prevent them. By taking the following precautions, you can reduce the risk of frozen water pipes and the resulting damage a bursting pipe can cause.
- Insulate Your Pipes
You can first begin insulating exposed pipes, as these are the most susceptible to freezing. Heat tape and cables can be used to wrap around pipes and retain heat. When using these tapes and cables, it is important that you use products approved by an independent testing organization and only for how you intend to use them, for either exterior or interior pipes. You should also follow all directions provided on the packaging.
- Seal All Leaks
Sealing air leaks in your basement and attic can also be beneficial as it will prevent cold air from entering these areas and freezing your pipes. You should start by looking for air leaks around electrical wiring, dryer vents and pipes, and then use caulk or expanding foam insulation to keep the cold out.
- Open Cabinets to Allow Heat In
Opening cabinet doors can allow heat to reach uninsulated pipes that are under your sinks. Do this in any area of the home where pipes are present, such as bathrooms and kitchens. If you have pipes that run along the wall through bedrooms, open up panels and allow heat from the home to keep these pipes warm.
- Allow Water to Trickle
Allowing a trickle of hot or cold water to drip overnight can also prevent the freezing of your pipes. Any water, regardless of the temperature, will help melt ice that forms inside the pipe, preventing it from freezing.
- Disconnect Outdoor Hoses
Securing outdoor houses, valves, and faucets is also an important winter maintenance tip to remember. You should disconnect your garden hose and, if possible, use an indoor valve to shut off and drain the water from the pipes leading to your outside faucets. This reduces the chances of your pipes freezing in the short amount of pipe inside of your home.
- Turn Up Your Thermostat
Adjusting your thermostat can also be yet another way to protect your pipes. By keeping your thermostat set at the same temperature during the day and night, you prevent freezing, and during extreme cold, this helps to reduce the strain that your furnace may also be facing.
- Insulate Attics and Basements
If you want long-term relief against frozen pipes, you’ll need to upgrade the insulation in areas of your home where pipes are exposed, such as attics or basements. Work with an insulation contractor to install your insulation so that all areas are properly ventilated.
What to Do If Your Pipes Do Freeze
Now that you know what should be done to prevent freezing pipes, what happens if yours freeze?
If you turn on your faucet and nothing comes out leave it turned on and call a plumber! You should also avoid the use of appliances near water, as areas with standing water could cause electrocution.
You should shut off your water supply if your pipes have already burst by cutting them off from the main supply. With the faucet still on, take a hair dryer (if you’re not near standing water) and heat the pipe to allow the ice to thaw.
Winterizing your pipes will help shield them from the threat of frost. Now that you know what things can be done to prevent your pipes from freezing and the tools necessary if something does go astray to help you, you can rest easy this winter!